-----Original Message----- From: OutpostPacket@yahoogroups.com [mailto:OutpostPacket@yahoogroups.com] On Behalf Of Wes Freeman Sent: Saturday, February 06, 2010 4:24 PM Subject: Re: [OutpostPacket] Outpost & SCS Modems (PTC-IIusb) You've probably already figured out that Outpost won't drive an SCS tnc directly. You need to use AGWPE. I've got the PTC-IIex (with an RS-232 port instead of USB) but the AGWPE parameters should be similar (except perhaps for the com: port). The agwpe.ini file that worked for me was: [TNC] TYPE=TAPR TNC2 KISSSUBTYPE=KISS INITKISS1= INITKISS2=packet INITKISS3=kiss EXITKISS=1 KISSID=0 KISSIDPORT2=0 KISSIDPORT3=0 KISSIDPORT4=0 FREQUENCY=PTC-IIex 1200baud ONAIR=0 MULTIPORT=1 AUTO=0 PERSIST=63 SLOTIME=10 TXTAIL=4 TXDELAY=30 RETRIES=10 MAXFRAME=2 TIMER1=4 TIMER2=5 TIMER3=120 SOFTDCD=0 FULLDUPLEX=0 SDCDTHRESHOLD=64 DAMASUPPORT=0 EAX25SUPPORT=0 [COMMUNICATION] PORT=COM1: BAUD=9600 If you install agwpe, paste the above settings into the .ini file, open agwpe, and then open Outpost and select AGW-local as your tnc, it should work. Hope this helps, Wes Freeman KG6POV